Harley Evolution Engine - Resized and Accessorized

prusaprinters

<p>I resized everything to 150% of the original design. This included properly resizing some of the components included in the Remix, such as the rocker covers, intake manifold, and display stand.</p> <p>Everything has also had an appropriate mirrored part added, where required.</p> <p>Files are all renamed to have their correct engine part names as well!</p> <p>Pipes can be printed in vase mode with 0.2mm layer height, 12 bottom layers, and 0.6mm external perimeter width. Use a brim!</p> <p>Intake manifold is the only part that requires supports.</p> <p>My method of assembly:</p> <p>Be sure to allow glue to set before moving on to the next step!</p> <p>Front and back of the crank/jugs first, add the cam cover, then the pushrods (make sure the pushrods are oriented correctly so the tops are not pointing away from the jugs).</p> <p>Assemble each head/rocker cover separately, adding the pipes last.</p> <p>Then add the left head to the rest of the engine, put a bit of glue in the holes for both sides of the intake manifold.</p> <p>Add the right head and align the intake manifold.</p> <p>Finally assemble the carburator halves and the velocity stack, then attach to the intake manifold as a single piece.</p> Category: Vehicles