Hasselblad Spirit Level - Model C

prusaprinters

<p>This is the third model (of three) that I designed for an alternative to Hasselblad's ORM spirit level. This version is a little bit of a departure from the others, with a more angular look that I think suits the camera well. Like the others, it fits nicely on the various camera model's accessory bar, just like the OEM version. It's printed in two interlocking parts for best overall final appearance (since any support material is placed on non-visible print areas. (My first design was a single part, but the needed support wreaked havoc on the final look, so I came up with this design to tackle that).</p><p>You'll need a spirit level to insert into the hole, once printing is finished, and the tiniest bit of super glue. This is designed to hold 12mm x 7mm spirit levels that can be bought from the usual places, I don't want to promote any one website/company by posting a link here, but if you need help finding them, message me and I can give you a link to the ones I've been using.</p><p>Obviously this is being offered on here so that people can make one for themselves (if you do, please let me know!), but if you would like me to print one for you, I'd be happy to for a reasonable price. Just email me and we can hash out the details.</p><p>To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)</p><p><br><strong>Print Instructions</strong><br>&nbsp;</p><p><strong>Rafts:</strong> None</p><p><strong>Supports:</strong> Yes (Tree supports are great, but not required)</p><p><strong>Resolution:</strong> 0.2mm</p><p><strong>Print Speed:</strong> 40/sec</p><p><strong>Infill:</strong> 30%</p><p><strong>Filament:</strong> Any PLA</p><p><strong>Nozzle temp:</strong> 205°C</p><p><strong>Bed temp:</strong> 55°C</p><p><strong>Post-Printing:</strong><br>Basic removal (and minor cleanup) of the supports, and sliding the two parts together. Then place the spirit level in the housing, with a little bit of super glue</p>