HDHomerun Duo Mount for Leviton Structured Media

prusaprinters

<p>A mounting bracket for a SiliconDust HDHomerun Duo tuner for <a href="https://www.leviton.com/en/products/residential/networking/structured-media-centers">Leviton structured media panels</a>. &nbsp;I put my tuner in the basement where all of the cables terminate and the main ethernet switch lives. &nbsp;The tuner drops in through the top of the bracket.</p><p>Uses the Leviton <a href="https://www.leviton.com/en/products/47615-nyl">push-lock pins</a>, but you could use wood screws and a washer if the panel was mounted on plywood.</p><p>Fusion 360 .f3d file is provided for modification if needed.</p><p>&nbsp;</p><h3>Print Settings</h3><p><strong>Printer: </strong>Ender 3 Pro w/ direct drive</p><p><strong>Rafts: </strong>No</p><p><strong>Supports:</strong> Depends</p><p><strong>Resolution: </strong>0.15-0.2mm</p><p><strong>Infill:</strong> 15% or higher</p><p><strong>Shells:</strong> 2+</p><h3>Notes:</h3><p>Doesn't need supports if printed upright, but it will be stronger if printed flat on its back which will need supports.</p>