Headphone Remix with controller stand remix combined.

thingiverse

This is a remix of NoycePrints head phone stand. https://www.thingiverse.com/thing:3534573 AND a remix of JUST the Xbox Controller portion from Gizfreak https://www.thingiverse.com/thing:4121323 Not my best work modeling but it works as intended and looks decent. Modified the controller holder for the Xbox controller to fit in the cord hook mounts on the back. Would be sweet for someone with wireless. Its balanced and doesn't tip over if one or the other are off the stand. I just wanted one stand for both devices. Followed infill and layer heights from both prints. Printed the XL version and have yet to see how well the controller sit on the standard size but the mounting holes should be in the same spots. Just don't know how much it changes the angle of controller when it sits on the stand. Can possibly fix if it is an issue. Just posting this up because I got some friends that wanted one. I also used supports but they're not necessarily require. Use you best judgement. Base: 40% infill. 0.3 Layer height --- need one Sides: 50% infill. 0.3 Layer height --- need two choose from Sides or XL sides Base posts: 100% infill. 0.24 Layer height --- need two Feet: 40% infill. 0.24 Layer height --- need three Headphone post/ mount: 50% infill. 0.3 Layer height --- need one Controller Stand: 30% infill. 0.2 Layer height --- need one Recommend printing the sides with a brim of 10 - 15 lines to prevent warping. Hardware I used. You can probably get away with using all M3x10mm buttonheads with no M3 nuts. 11 M3x10mm screws for feet, base to base posts, base posts to sides. 4 M3x20mm Controller stand. 4 M3x16mm with 4 m3 nuts for the headphone holder.