Heart Keychain (G)

prusaprinters

<p>This is a re-design based on the original design from Thingiverse which can be found here (<a href="https://www.thingiverse.com/thing:672318">https://www.thingiverse.com/thing:672318</a>).</p> <p>Not exactly a re-mix, but not the original cad file. I redesigned in Solidworks and added a little "G" flourish to it for my daughter. I printed the original design a few years back for my daughter and it broke so I wanted to replace it. Thank You for the original design which I marked this as a Remix of.</p> <h3>Print instructions</h3><p>Printer Brand:</p> <p>Prusa</p> <p>Printer:</p> <p>I3 MK3S</p> <p>Rafts:</p> <p>No</p> <p>Supports:</p> <p>No</p> <p>Resolution:</p> <p>150 um</p> <p>Infill:</p> <p>15% - STAR</p> <p>Filament: Makerbot PLA Translucent Red<br/> Notes:<br/> Note: This is "ancient" PLA filament - from sometime around the end of 2014. It still prints nice at 205 for the first layer and 200 for the subsquent layers. I.e. this has a low melting point.</p> <p>This spool literally sat on the top of my Thing-O-Matic for since it came out of the package. I'm bewildered that it still prints nice.</p>