Heater Block Thermal Jacket Mold
thingiverse
The heater block of 3D printers is subjected to a considerable heat loss both for exposure to air, but also for the cooling fans that inevitably also involve the nozzle. This bi valva mold allows to create a "coat" to isolate the heater block (dimensions 16x16x12 mm) simply by screwing the mold to the thermal silicone tube and injecting into the contents. At the bottom you can see the three pieces that make up the mold, or the two valves and the internal counter mold. Just insert the counter mold inside the two valves by tightening them with four screws, screw the whole thing to the thermal silicone tube and squeeze it until it fills the entire mold. The drying times are shown on the type of silicone used. (G-Translate) More Info: http://www.karnhack.com/heater-block-thermal-jacket/
With this file you will be able to print Heater Block Thermal Jacket Mold with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Heater Block Thermal Jacket Mold.