Hela on Throne 3D Printing Miniature | Assembly

gambody

HISTORY OF THE HELAHela is the daughter of Loki and the giantess Angrboda. When Hela reached the age of majority, she was appointed goddess of the northern realms of the dead and she became the ruler of Hel and Niflheim. Her power extends only to those who have not died as a hero. Nevertheless, Hela often seeks to expand her kingdom, trying to conquer Valhalla, which often leads Hela to a conflict with Odin and his son Thor. One day, Hela tried to convince Thor to enter Valhalla when he was a hair's breadth from death, although he eventually refused. Hela also entered into an alliance with the Gods of Earth's Death. When Odin entered to Odinsleep, his attention and influence on Valhalla weakened and Hela gained a new chance to conquer it. But as soon as he found out about her intentions, a great battle took place. And for your attention, the continuation of the Hela’s model which now has great Throne. The Throne is the author’s work which framed with skulls and sitting on it she shows her power over the dead.ABOUT THIS 3D MODELHela on Throne 3D model for printing was created in ZBrush. The model is saved in STL files, a format supported by most 3D printers. FDM version features:
- Contain 15 parts.
- Made with connectors.
- Removable sword.- Removable thron. Hela 3D Model is fixed on the throne by the cloak.
- All parts are divided in such way that you will print them with the smallest amount of supports.SLS/SLA version features:

-Same as FDM but smaller and made as 2 part. With removable throne.All .STL files for 3D printing have been checked in Netfabb and no errors were shown.Note: Before starting 3D printing the model, read the Printing Details for CURA 2.7.0. Software.There are 15 parts for FFF/FDM version and 2 parts for SLS/SLA version.
All parts of connectors should be printed at 100% infill.Scale: 
Model made as 1/8 scale in FDM version and 1/16 in SLS/SLA version.FDM version dimensions:
After being printed will stand: 255 mm tall, 165 mm wide, 204 mm deep;- Connectors should be printed at 100% infill to make them solid.SLS/SLA version dimensions:
After being printed will stand: 128 mm tall, 68 mm wide, 102 mm deep;- Has only 2 details in to keep printing costs down.WHAT WILL YOU GET AFTER PURCHASE?- .STL files of Hela on Throne for 3D printing which consist of 17 parts.
- 2 versions of files for this model for FFF/FDM and SLS/SLA.
- Removable Throne in both versions.- Removable sword.
- High-poly detailed model of Hela on Throne.
- Made in scale 1/8 for FFF/FDM and 1/16 for SLS/SLA.
- Detailed settings that we provide for Cura 2.7.0. for the best print.
- Full technical support from the Gambody Support Team.Watch the tutorial video on how to assemble Hela on Throne 3D Printing Miniature at Gambody YouTube channel.  You can get Model of Hela on Throne for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.Also, you may like other 3D models of heroes from Ragnarok movie as well as 3D Miniatures of Marvel and Villains._______FAQ: Where can I print a model if I have no printer?How to get started with 3D printing?How to set up my 3D printer?How to choose right 3D model print bed positioning? How to paint printed figurine?This model was tested in Cura 2.7.0. and printed on an Ultimaker 2 in PLA material.Note: All parts of connectors should be printed at 100% infill.To avoid printing problems, we recommend the following settings:Quality Layer Height: 0.1 mmInitial Layer Height: 0.27 mmLine Width: 0.35 mmWall Line Width: 0.35 mm   Outer Wall Line Width: 0.35 mm   Inner Wall(s) Line Width: 0.35 mm   Top/Bottom Line Width: 0.35 mm   Infill Line Width: 0.35 mm   Skirt/Brim Line Width: 0.35 mm   Support Line Width: 0.35 mm Initial Layer Line Width: 100%Shell Wall Thickness: 1.05 mmWall Line Count: 3Outer Wall Wipe Distance: 0.2 mmTop Surface Skin Layers: 0Top/Bottom Thickness: 0.8 mm   Top Thickness: 0.8 mm       Top Layers: 8    Bottom Thickness: 0.8 mm      Bottom Layers: 8Top/Bottom Pattern: LinesBottom Pattern Initial Layer: LinesTop/Bottom Line Directions: [ ]Outer Wall Inset: 0.025 mmCompensate Wall Overlaps: Check    Compensate Outer Wall Overlaps: Check    Compensate Inner Wall Overlaps: CheckFill Gaps Between Walls: EverywhereHorizontal Expansion: 0 mmInitial Layer Horizontal Expansion: 0 mmZ Seam Alignment: ShortestIgnore Small Z Gaps: CheckInfill Infill Density: 20% (all parts of the connectors should be printed at 100% infill)Infill Line Distance: 3.5 mmInfill Pattern: GridInfill Line Directions: [ ]Infill Overlap Percentage: 10%    Infill Overlap: 0.035 mmSkin Overlap Percentage: 5%    Skin Overlap: 0.0175 mmInfill Wipe Distance: 0.0875 mmInfill Layer Thickness: 0.1 mmGradual Infill Steps: 0Infill Before Walls: CheckMinimum Infill Area: 0 mm2Material Enable Retraction: CheckRetraction Extra Prime Amount: 0 mm3 Retraction Minimum Travel: 0.7 mmMaximum Retraction Count: 90Minimum Extrusion Distance Window: 6.5 mmNozzle Switch Retraction Distance: 20 mmNozzle Switch Retraction Speed: 20 mm/s    Nozzle Switch Retract Speed: 20 mm/s    Nozzle Switch Prime Speed: 20 mm/s Speed Print Speed: 45 mm/s    Infill Speed: 45 mm/s    Wall Speed: 36 mm/s      Outer Wall Speed: 26 mm/s      Inner Wall Speed: 36 mm/s    Top/Bottom Speed 20 mm/s    Support Speed: 26 mm/s      Support Infill Speed: 26 mm/sTravel Speed: 90 mm/sInitial Layer Speed: 27 mm/s
    Initial Layer Print Speed: 27 mm/s    Initial Layer Travel Speed: 54 mm/sSkirt/Brim Speed: 27 mm/sMaximum Z Speed: 0 mm/sNumber of Slower Layers: 2Travel Combing Mode: AllAvoid Printed Parts when Traveling: CheckTravel Avoid Distance: 0.6562 mm Cooling Enable Print Cooling: CheckFan Speed: 100%    Regular Fan Speed: 100%    Maximum Fan Speed: 100% Regular/Maximum Fan Speed Threshold: 10 sInitial Fan Speed: 0%Regular Fan Speed at Height: 0.27 mm    Regular Fan Speed at Layer: 2 Minimum Layer Time: 5 sMinimum Speed: 10 mm/sSupport Enable Support: CheckSupport Placement: EverywhereSupport Overhang Angle: 50°Support Pattern: Zig ZagConnect Support ZigZags: CheckSupport Density: 15 %    Support Line Distance: 2.3333 mmSupport Z Distance: 0.1 mm    Support Top Distance: 0.1 mm    Support Bottom Distance: 0.1 mmSupport X/Y Distance: 0.7 mmSupport Distance Priority: Z overrides X/YMinimum Support X/Y Distance: 0.2 mmSupport Stair Step Height: 0.3 mmSupport Stair Step Maximum Width: 5.0 mmSupport Join Distance: 2.0 mmSupport Horizontal Expansion: 0.2 mmSupport Infill Layer Thickness: 0.1 mmUse Towers: CheckTower Diameter: 3.0 mmMinimum Diameter: 3.0 mmTower Roof Angle: 65° Build Plate Adhesion Build Plate Adhesion Type: BrimSkirt/Brim Minimum Length: 250 mmBrim Width: 8.0 mm    Brim Line Count: 23 Brim Only on Outside: CheckMesh Fixes Union Overlapping Volumes: CheckMerged Meshes Overlap: 0.15 mmSpecial ModesPrint Sequence: All at OnceSurface Mode: NormalExperimental Extra Skin Wall Count: 0Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.