Heli Hanger for Hanging RC Helis and Planes on Honeycomb Storage Wall

prusaprinters

<p>I hung all my planes directly to the ceiling (at least the big planes) but I had the little planes and the helicopters sitting on my shapeoko and getting in the way. &nbsp;I wanted to just hang them to the ceiling, but I put a unit heater in the garage, and I was afraid it would blow them all over and not stay in place. &nbsp;I had a small sliver of space on the wall under the unit heater, so I printed a honeycomb storage wall (thanks to rostap of course) (<a href="https://www.printables.com/model/152592-honeycomb-storage-wall">https://www.printables.com/model/152592-honeycomb-storage-wall</a>) and off I went.</p><p>You have to print the M3 inserts and use M3 nuts and bolts from Rostap. &nbsp;All attributions to their fine work sent their way, of course. &nbsp;After that, bolt it up, stick it in, and hang it up.</p><p>There's also one for the VolantexRC planes, you can see them in the picture. &nbsp;I just hung them from their one wheel. &nbsp;Some of the helis are hung from the back of the skids, others from the front. &nbsp;If they were small, I just did it from the back.</p><p>I just combined them all into one fusion file, sorry for the mess but it really comes down to what size you need based on the size of your heli. &nbsp;I printed all of them in PLA.</p><p>I noticed one of the prints has the M3 Inserts from RostaP. &nbsp;Those are their design and belong to them, so if they are not OK with me having them in my print files they can let me know and I will delete.</p>