HELLSING .454 CASULL AUTO model gun

thingiverse

1:1 replica based on the anime OVA and official concept art You can get the full version here：https://cults3d.com/en/3d-model/various/hellsing-arms-combat-pistol-model-454-casull-auto Trigger, hammer, magazine, shutter, slide and gun mechanism are all movable The original version has a complete internal structure, but the internal structure is too fragile (not suitable for printing) in order to restore the appearance, so the linkage of the internal structure was removed Casull is basically modified from the 1911, but the slide and mechanism were augmented according to the original (based on the dimensions in the animation and concept art), while the magazine was not augmented, so loading could not be completed The magazine release button is attached by a tiny cylindrical pin. The hammer can be used with most sizes of torsion springs. I think this should be the best .454 Casull Auto model to restore details. Some hardware The pin length can be less than the recommended value Some relatively robust pins can be printed directly 5*120 pin 4*22 pin 3*20 pin 2.5*21 pin 5*15 pin 3*5 Slotted Flat Head Machine Screw 0.7*10*200 spring This is the spring size I used, but it was too weak, so I used two of these springs, which resulted in a spring length of 400mm, making it difficult to install. So please increase the spring wire diameter as needed. 0.4*3*10 Two such springs. For trigger and magazine release buttons