Hero Me Gen3 for ANet AM8 with MGN12 Linear Rail Guides

thingiverse

Hero Me Gen3 bests BantaMount and others in head to head comparison ----------- <iframe width="560" height="315" src="https://www.youtube.com/embed/qW2EEqCh0NI" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> Hero Me Gen3 bests Petsfang V2 in head to head comparison ----------- <iframe width="560" height="315" src="https://www.youtube.com/embed/nGxC0QkL4Mc" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> Custom Hero Me Gen3 cooling system by special request. This is not yet tested. This is designed for an ANET AM8 with MGN12 linear rail guides and an E3D V6 or Volcano hot-end. The duct requires two 5015 radial fans. The part cooling duct can be adjusted vertically to support both the regular E3D V6 and the E3D V6 Volcano (shown). The bottom of the cooling duct tips should be between 1mm and 2mm above the build plate when the nozzle is touching the build plate. I set mine to between 1.2mm and 1.4mm. Print the parts in the orientation as provided. Use supports from build plate only. The heat sink cooling fan shroud can be found here: https://www.thingiverse.com/thing:1662879 TinkerCAD project files can be found here: https://www.tinkercad.com/things/5u9EHO40XYJ Update June 27th: Hero Me LightWeight Dual 5015 Ducts! This is a 2 piece print that greatly reduces the weight of the ducts. Very short path straight down to the parts. Nothing blocking your view of the hot-end. Fans are flipped 180deg compared to all the previous Hero Me cooling ducts. ---------