Hex Hook for Prusa Mini+ Vertical Extrusion
prusaprinters
<p>A hook for hanging the HexScraper (or other items) from the Prusa Mini+ vertical extrusion. </p><p>I added a flat surface to the bottom of the hook to print on. Make sure to print in this orientation so the layer lines run perpendicular to the edge that must flex to insert the part into the extrusion. I was breaking off that piece if I printed the other way. </p><p>To install, gently push the rounded end into the extrusion channel. You may need to pinch the rounded bits slightly to get it to go in. It should be a snug fit.</p><p>I had good luck printing this and getting it to work in both PLA and PETG with 100% infill, 0.10mm layer height. In both cases, it took approximately 20 minutes to print.</p><p> </p><p>I pulled dimensions from the models by michalhosna and visle to create this. Thanks! </p>
With this file you will be able to print Hex Hook for Prusa Mini+ Vertical Extrusion with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Hex Hook for Prusa Mini+ Vertical Extrusion.