Hex key holder for 1.5 to 10 mm keys
prusaprinters
<h4>Updates</h4><ul><li>2022/03: Added chamfer to one side for easier insertion of keys (v1.1), made clamping surface area inside the holes slightly larger.</li></ul><p> </p><h4>Description</h4><p>Metric hex key holder for sizes 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 mm.</p><p> </p><h4>Print Settings</h4><p>Recommended material is TPU. Might work in PETG. Due to creeping, it will not work in PLA for more than a couple of days - after that, some keys will just slip out. Depending on your X/Y step and flow calibration, you might need to scale this print up or down by 1-2% for a perfect fit.</p><p><strong>Recommended settings:</strong></p><ul><li>Layer height 0.2 mm</li><li>Line width 0.42 mm</li></ul>
With this file you will be able to print Hex key holder for 1.5 to 10 mm keys with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Hex key holder for 1.5 to 10 mm keys.