HGLRC XJB-145 Parts

thingiverse

All parts are designed to be printed with TPU or similar flex filaments. # Camera Mount ### Details * Fixed 45 degrees angle * Variable mounting position * Provides a somewhat better protection than the default mount (i cracked two cams with that) ### Build instructions 1. Print in TPU (Using supports) 2. Insert camera, secure using two screws and optionally some washers 3. Slide over the front two standoffs. 4. The top plate will be visible in the camera image. If you don't want that, rotate the top plate 180° # VTX Antenna mount ### Details * Secures a simple "whip" antenna to the back of the copter * Provides a latch for a ziptie to lock it in place ### Build instructions 1. Print in TPU (No supports required) 2. Push in the antenna, put a ziptie through the provided latch and tie it up. 3. Slide the assembly over the back standoffs # RX Antenna mount ### Details * I'm using a FRSKY RX with two antenna wires * This keeps the antennas out of the props * You will need two pieces of antenna tube ### Build instructions 1. Print in TPU (No supports required) 2. Slide in the antenna tubes (should provide a snug fit) 3. Mount it to the top plate, feeding the wires through the plate holes