Hictop Inductive Sensor Holder
thingiverse
I designed this circuit to test my sensor, and I included a photo of the LM7 5V 1.0A regulator to demonstrate its installation. Remember that the brown wire always supplies constant 12V power from your board's power source. Connect the output of the sensor, which is typically black, directly to the input end of the LM7 5V 1.0A regulator. Next, solder a ground wire from the middle pin on the regulator, which serves as its ground connection. Then, connect an output wire to the LM7's output pin and route it to the VCC+ pin on the -ZMIN module, indicated by red in the image provided. Finally, connect the ground wire to the ground pin on the module, as shown in the photo.
With this file you will be able to print Hictop Inductive Sensor Holder with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Hictop Inductive Sensor Holder.