High Bypass Engine Nacelle

cults3d

***** STEP files now included ***** This includes: All nacelle parts Split versions of the larger parts Chevroned reverser cowls Gearmotor All remixed parts from CATIAV5FTW This Nacelle is modeled after the Trent 900 Nacelle as used on the A380. It is designed specifically for the 3D Printable High-Bypass Jet Engine by CATIAV5FTW (Chris Shakal). I used his model with minimal changes and substitutions. While most of his original design remains intact, some parts must be replaced or modified. I have included remixed versions of most of his parts. The remixes simplify or eliminate the need for supports. A few of his parts are in their original format but are included with my numbering system added for convenience. This model does not have "operating" reversers. It is more like the outer engines on the A380 that don't have reversers. Functional reversers are available separately.https://cults3d.com/en/3d-model/gadget/functional-thrust-reverser-trent-900 A gearmotor is also available.https://cults3d.com/en/3d-model/various/motorized-high-bypass-engine-nacelle **** While the technical requirements to print and build this model are not great, there are a lot of pieces and many are quite large. Some fitting, adjustment, and gluing may be required. Total cost of this project is around $150 (2020 USD). Print time may exceed 300 hours. It will be a rewarding project but will require significant time and dedication. Note: Make sure you place the TN1-828 SWIRL_DOME_PLATE inside the TN1-703_COMBUSTION_LINING_BODY. I see many of these models with the dome plate incorrectly placed on the end of the combustion lining body. The fuel injectors will not line up correctly with the swirl dome in the wrong position. The swirl dome plate slides in from the side in a circular motion and may not even require adhesive if it's located correctly.