HobbyKing Skyraider Prop / Canopy /Tail wheel

cults3d

Hobbyking Skyraider alternative replacement prop and tail-wheel assembly, I have successfully flown using these parts multiple times. The nubbin goes on the prop shaft first followed by the prop and then secured with the original washer and nut. I have just been using a bit of pla as the axel for the tail wheel. I recommend the best quality pla you can afford for the props, I've had the best results using PolyMaker PolyMax but have flow using budget brands too. If more parts fail and I can make a fix I will update this, I hope someone else find these useful Set the width of the wheel to 90% in the slicer if you're using the fixed tail wheel strut and glue the strut to the base with ca glue. If you are using the canopy, glue a neodymium magnet onto the tab.