Holder for Park Tool INF-2 inflator

thingiverse

We use the Park Tool INF-2 inflator at the bike shop and wanted somewhere to keep it so it would always be easy to find. I made this holder which screws to a 4x4 support and holds the inflator by the chrome trigger. Works nice and fits well. **Update Jul 31 21:** Seeing leibertf's make I realized that if you used this connected to a hose coming from below, it'll stick out. With that in mind I have changed the design to have four angles: * 7 degree, keeps the mount closer to the wall. Good if you want to keep the mount itself as low profile as possible when the inflater isn't on it. Also sticks the handle of the inflater out the most which may work better for some mount positions. * 10 degree - the original design. * 20 degree - halfway between the 10 and the 30 degree designs. * 30 degree - should hold the body of the inflator near vertical which might work better if you have a hose attached. The only issue with this holder is that our air hose comes from the ceiling so using this holder, the hose has to loop around and winds up getting in the way. To address this I have created [this inverted holder](https://www.thingiverse.com/thing:4913993) which holds the same inflator upside down by the gauge body. We now use this "upright" holder for our spare inflator. **NOTE:** the STL preview might show it standing up, but I've removed that one and oriented it properly laying on its side. Printing it that way it should not need supports. I don't use the INF-2 at home, so haven't created a pegboard version. LMK if you want a pegboard version as it wouldn't be tough to modify for that use.