Hollow Cylinder - Threaded top

thingiverse

This is a hollow cylinder I designed with a threaded top. The measurements for the cylinder, with the top completely screwed on, are 4.5'' height and 2.5'' radius. You can add sand or weights to the hollow center to help prevent it from tipping over. Once the top is screwed on completely the seam is almost invisible. I created this cylinder for my girlfriend to use with her item photography. Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: No Resolution: 1.2mm Infill: 25% Notes: With the resolution of 1.2 mm, and my current printer profile, it took about 40 hours to print. I was able to print them with the top and bottom of the cylinder on the bed without any support needed. Version 3 I reduced the total amount of filament needed from versions 1 & 2. If I made the resolution more course to speed up the print I'm doubtful the threads would work but if someone gives it a try please let me know if I'm wrong. How I Designed This Version 3 I designed Version 3 with Fusion 360 so I could hollow the cylinder and add the threads. Version 2 was durable at 25% infill, however, it was much too light.