Home Assistant Yellow Wall Mount

prusaprinters

<p>This bracket for the <a href="https://www.home-assistant.io/blog/2021/09/13/home-assistant-yellow/">Home Assistant Yellow</a> makes it super easy to mount on a wall, ceiling, or other flat surface.&nbsp;</p><p>The included Back plate replaces the clear factory back plate that comes with the unit. Here is how you put it together:</p><ol><li>Print 1 x Back Plate and 2 x Wall Mounts</li><li>Attach the Wall Mounts to the Back Plate with 4 x M3 12mm flat head bolts and 4 x M3 square nuts</li><li>Attach the printed assembly to the Home Assistant Yellow with the 4 x brass thumbscrews that came with the Yellow device.</li></ol><p>Once complete the Yellow can be attached to the wall via the keyhole slots on the Wall Mounts.</p><h5><strong>Printing</strong></h5><ul><li>Print in PLA, PETG, or PC. If the Yellow will be in warm conditions consider using a heat-tolerant filament like PETG or PC instead of PLA.</li><li>Print using a .2 or .3 layer height</li><li>Use 4-6 perimeters/shells</li><li>STLs are pre-positioned in the correct print orientation</li><li>Supports not required</li></ul><p>Happy Printing!</p>