Home-made Ice Cream/Waffle Cone Holder

thingiverse

Ice cream/waffle cone holder that holds 6 delicious home-made ice cream/waffle cones which allows them to cool after rolling them! I bought a Chef's choice waffle cone express, it came with a roller which works well... But no way to hold the cones while cooling. Small glasses do work but I found they produced moisture on the bottom half of the cone while cooling. I decided to design my own! It holds 6 cones at the same time. Has an integrated eyelet to hang evenly on the wall. Instructions UPDATE: Untested (my printer is dead right now). "Ice Cream Cone Holder v3 - wider legs.stl" uploaded which should support ice cream cones when filled with ice cream. v2 supported empty ones (even stacked). But when full it tipped over with only 1 cone put in the holder. Base widened from 75mm to 100mm and also made an inside taper on the legs which looks MUCH better! Printed using Sailfish 7.4 on a Replicator 1 1 Shell in Print-o-matic (2 in total) and 10% infill. I did have small hairs on the legs as the travel distance is so large (190mm). Probably increasing the retraction or the travel speed could solve this.. but they were easily removed. After I cut off the hairs I used a heat gun and the white marks disappear like magic :) As you make your cones you can pile the 2nd one made into the first one etc... Or print 2 stands to hold 12 cones :) The diameter of the holes is 40mm and are 75mm off the table. So it should hold most cones with the exception of very thin sugar cones!