Honda EU2000i Generator Oil Funnel
thingiverse
This is a remix from https://www.thingiverse.com/thing:398515 Peter120's excellent EU1000i oil funnel *kinda* worked for my (2006) EU2000i, except for two things: The threads were a wee bit too tight, and the funnel neck was about 12mm too short, so it rubbed the generator case. I reduced the X & Y dimensions by about 0.5mm at the threads, and extended the neck by 12mm. Now it fits my EU2000i very well. UPDATE: Added a gasket STL that I printed in NinjaFlex TPU. NOTE: I have heard that newer EU2000i's have a different size oil filler. This may not work. One way to be sure is to use your slicer to cut off just the threads and a bit of the neck. Then print the threads to see if the threads fit your generator.
With this file you will be able to print Honda EU2000i Generator Oil Funnel with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Honda EU2000i Generator Oil Funnel.