Honda Grom CBR300R/CB300F Intake Adapter Elbow

thingiverse

This part was printed in PLA and it currently works, other materials will probably work better, but this is what I had available and I'm currently happy with the results. A few notes: * I did not use brass threaded fittings for the injector rail bolts (they hold fine) so the holes will need to be drilled if that's your plan. * The injector is a tight fit and will need Hondabond or a larger O-ring to seal against the walls. * You will need to source a silicone hose since the original rubber hose will not fit. * If you're printing settings are not dialed you will need to do plenty of sanding to bring things back to specs. * Print with raft and as many supports as possible, it's more work to remove but trust me, you're better off removing supports than having a failed print. I hope I can release an updated version based on lessons learned in a not too distant future Good luck printing. -Manny