Honeycomb Patterned Hexagon Coaster

prusaprinters

<p>This is just a simple remix to fix the incorrect size and poor orientation of the original so that they're ready to be sliced and printed as soon as they're loaded into your slicer. I scaled to 2540% and oriented the STLs so they're laying flat and centered on the bed with the maximum dimension aligned with the X axis.</p> <p>I also made versions of the models that are 2mm shorter because the original seemed unnecessarily high. I would recommend the shorter version since it uses less material and has more typical coaster dimensions. Both sizes are shown in the photo.</p> <p>For some reason in Cura with combing mode set to "All" it doesn't comb properly. In order to eliminate any chance of stringing, you have to set combing mode to "Not in Skin" which makes it comb properly and keeps all of the travel movements within the print lines.</p> <p>You can glue the insert to the base if you want, but there's really no need.</p> <p><em>I didn't remix the STL for the coaster without a bottom because a coaster without a bottom is really just a platform and not a coaster.</em></p> <hr/> <h3>Some of My Designs</h3> <p>Click an image below (opens in a new tab) or <a href="/Lyl3/designs">go to my designs page and see them all.</a></p> <p>If you see some thing that you like ,<strong>please click the Like button</strong> and turn that heart red .</p> Category: Kitchen & Dining