Hornady Lock-N-Load bullet tray

thingiverse

This is a tray and some clips I created to hold the projectiles when reloading. It attaches directly to the arm of the press without any tools. Just simple push them on and the extensions will hold things in place. There are two types of clips here. One with extensions (things that stick out from the arms) of 1mm and another of extensions that stick out of 1.5mm. I have two of them because if the 1mm is too loose, you can sand the 1.5mm clip down to get things just right. The 1mm clip fits my press but yours may be different so I have also included a stl of one of each type in the file so you can print them both out and adjust accordingly. The clips have a 10mm X 20mm dovetail on them so other things could be attached if desired. I have included a small 70mm X 90mm tray that works perfect for holding projectiles. I would use two clips for this as you can see in the picts. The whole thing holds a lot of weight and is very stable. BTW, in some of my pictures you can see the excellent case feeder remix by bartje64 located here: https://www.thingiverse.com/thing:2883143 I have included the openSCAD files so you can edit things if you need to. I only ask that you give credit and please do not use these for any commercial stuff.