Hose Hanger for Compressed Air Hose

prusaprinters

<p>I needed to run some flexible compressed air hose around the wall of my shop, so I made these wall-mounted hangers. They are good for hose up to 17mm diameter (and maybe a bit bigger). &nbsp;These are not designed to take a lot of stress or pulling force (but are pretty strong anyway); they are just for hanging the hose up and out of the way.</p><p>These are “semi-permanent” hangers in the sense that the hose can be easily removed from the mounted hanger if I want to re-position or replace it, without having to remove the hanger itself.&nbsp;</p><p>The hangers are designed with an angled screw mounting hole to make it easier to insert the screw in overhead locations. The mounting hole diameter is 4.8mm (3/16").</p><h4>Print Instructions</h4><p>Print in PLA using the 3mf or gcode files provided. In general :</p><ul><li>0% infill</li><li>5 perimeters</li><li>print edge down on bed</li></ul><p>I printed on a smooth build plate, and did not need to use a brim.&nbsp;</p><h4>CAD</h4><p>The OnShape 3D CAD files for this are here :</p><p><a href="https://cad.onshape.com/documents/429ceabe88fc590d1a7e4ca9/w/2a6e0fd189f8a86925a6e20c/e/ee01a89a54d9d86d98b35638">https://cad.onshape.com/documents/429ceabe88fc590d1a7e4ca9/w/2a6e0fd189f8a86925a6e20c/e/ee01a89a54d9d86d98b35638</a></p><p>&nbsp;</p>