Hotwheels Audi Sport Quattro Display Base

prusaprinters

<p>This display should work with the mainline basic version of the Audi Sport Quattro.</p><p>The display base is separated into 3 parts, name plate, the base and the back plate.</p><h3>Print Settings</h3><p>Nozzle size = 0.4 mm (minimum, smaller better)<br>Layer height = 0.2 mm</p><p>Filament change layer for colours on BoxBackAssem:<br>1) Layer 19 (Outer line of both stripe and "Audi Sport Quattro" lettering, mine is black)<br>2) Layer 24 (Middle stripe colours, mine is grey)<br>3) Layer 29 (Left stripe colour, mine is red)<br>4) Layer 34 (Both horizontal stripe, mine is yellow)</p><p>Filament change layer for colours on name plate:<br>1) Layer 7 (Lettering on name plate)</p><h3>Colours</h3><p>Colours of all other items is your choice.</p><h3>Assembly</h3><p>The car is tied with metal wire through the display base holes, the wire will need to be slide between the wheels and the metal body.</p><p>Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.</p><h3>Others</h3><p>Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.</p>