Hotwheels Mercedes 300SEL 6.8 AMG Display Base

thingiverse

###If you like my display designs, feel free to follow me on twitter and instagram! Feel free to comment and provide any feedback too! ###[Twitter](https://twitter.com/Giga_Penguin) ###[Instagram](https://www.instagram.com/GigaPenguin3DPrinting/) Description ==================== A base for Hotwheels Mercedes 300SEL 6.8 AMG from the Deutschland Design set. The base is separated into 2 parts, the base and the back plate. The back plate is separated so it can be easily printed in multi colour. Item used from Thingiverse ==================== Mercedes logo was taken from here: https://www.thingiverse.com/thing:1552272 Spa race map is probably from here: https://www.thingiverse.com/thing:3372493 Print Settings ==================== Nozzle size = 0.3 mm (minimum, smaller better) Layer height = 0.2 mm Filament change layer for colours on backplate: 1) Layer 19 (Driver details and vehicle name, black letters in picture) 2) Layer 25 (24 hours of Spa logo, blue logo and lettes in picture) 3) Layer 30 (Spa track map, silver track map colour in picture) Filament change layer for colours on Mercedes Logo Thick: 1) Layer 4 (Mercedes Logo colour) Colours ==================== The colour of the Mercedes logo, back plate and the base is your choice. Mercedes logo will need to be glued on by yourself. Others ==================== The transparent box I'm using to store the base and car in the first picture is bought from here: https://shopee.com.my/Tarmac-Work-Protector-tarmac-box-i.13932494.1598531194 Also, the Spa track map used is slightly inaccurate to the one back in 1971. The chicane near the end of the lap is slightly different but it is not too different to the modern layout.