Howl's Moving Castle Lithophane

thingiverse

<img src="https://i.imgur.com/3u7peVv.jpg" alt="alt text" title="" /> <img src="https://i.imgur.com/JLylnQj.jpg" alt="alt text" title="" /> <img src="https://i.imgur.com/xWUUsXh.jpg" alt="alt text" title="" /> <img src="https://i.imgur.com/QNKk46v.jpg" alt="alt text" title="" /> Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer and S3D. Dimensions: 176mm x 105mm x 5.5mm. Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a very large and detailed stl file and may put some systems/slicers under pressure. It slices best in PrusaSlicer , Cura 4.2+ or S3D. A note on slicing in Simplify3D: It’s easiest to slice the lithophane in Cura(or Slic3rPE) as there’s an extra step in Simplify3D due to the way the lithophanes are created(this by design to allow additional editing/printing options for more advanced users). If you want to use Simplify3D you just need to do the following: Load the lithophane STL into S3D as normal. Click Mesh–Separate Connect Surfaces Slice as normal The added bonus of doing this is you can re-crop the image into the frame if you wish, or easily resize or remove the frame altogether. Using this method you can also print the frame in one colour/material and the lithophane in another if your printer has that option. If you don’t do the above in S3D there may be a tiny gap between the frame and the lithophane when you actually slice the model. Check out more on my site: https://www.gadunky.com/