HP hard drive mounting grommet

prusaprinters

<p>This is a model of hard drive mounting grommet commonly used in many HP desktops, both Elitedesks and Prodesks. &nbsp;</p><p>Why buy them when you can print them!</p><p>Printing Instructions:</p><ul><li>Print 4x grommets for each hard drive</li><li>0.2 layer height</li><li>20% infill</li><li>PLA or PETG</li></ul><p>Installation Instructions:</p><ul><li>Attach grommet to hard drive using 4x M3x6mm screws</li><li>Mount hard drive into HP chassis</li></ul><p>&nbsp;</p><p>Here are the dimensions if you want to create your own:</p><ul><li>Base outer diameter: 12mm</li><li>Base inner diameter(open): 3.3mm</li><li>Base height: 2.6mm from z=0</li><li>Upper outer diameter: 8mm</li><li>Upper inner diameter (open): 6mm</li><li>Upper height: 5mm from z=0</li></ul>