HP Pavilion 23cw Mount

prusaprinters

<p>This fits the HP Pavilion 23cw. You might need to make the holes for the VESA mount larger, I used a soldering iron to enlarge them. I also used a file to adjust the tabs that go into the monitor, as the came out of the printer a bit big, although they are modeled correctly. The taller mount is so that the monitor is equal in height to my other monitor, as the adapter is located in a more centered position on the monitor. I used a combination of melting the plastic together with a soldering iron and superglue to attach everything together. With the smaller adapter you might also have to increase the size of the holes for the tabs, as it was the first version I made. I used 100% infill for the tabs and printed them flat, for the VESA adapter and hook I used 35%. Furthermore for the hook I had to enlarge the gap in the back a bit to accommodate the head of the screw I was using. It is all a bit sloppy as I wanted it to be done quickly and am not the best at 3d modeling but it all functions. It has held my monitor well, although I wouldn't trust it with too much more weight. Hopefully I can save you the headache I went through.</p> Category: Computer