HTC Touch Pro USB Stand

thingiverse

Designed this after seeing the iphone stand another guy made on here and decided the do similar but with my current phone. I started with the basic monoloth style look like the iphone but wanted something stepped down, then i decided to change it to something semi organic with overlapping stepping lines for fun. enjoy. Instructions You will need to cut all pieces out of roughly .2 inch acrylic. Up to you on method of piecing together, add holes if you wish to sandwich together or simply glue together with some Weld-On. Personaly i cut everything out, then glued the top 7 pieces together with a syringe and acrylic cement from TAPS. Did the same with the bottom 3 pieces, let set overnight. Then drilled two holes into the bottom three of which i continued about halfway up the top 7. Then i tapped it with a tap and die set and countersunk the holes with a set of countersinks. after that stick the usb cable into the hole pushing it up towards the top so that its flush with the top hole. then just screwed the top and bottom together and feed the cord through the hole