HTC Vive Wireless 80mm Fan Mount

thingiverse

DISCLAIMER: for a permanent installation, you will need soldering skills to move the wireless adapter's Vive logo button out from under the fan and onto a slot on the bottom of the print. I am not responsible for any damages you make to your Vive or the wireless adapter. A friend asked me to create an 80mm fan mount for him, with some space for buttons and a nice infill so he can modify it on his own. This is the result. I highly recommend getting a fan grill from this thing [here](https://www.thingiverse.com/thing:2802474) (I went with the honeycomb!). Since this covers the Vive logo button, you can move it down to the "bill" of the mount, and place a 6x6mm breadboard button inside from the button and route some 30 AWG wires into the wireless adapter. The hole for the breadboard button is 7.5x7.5mm so you may need hot glue to hold it in place. The logo button cover can be retrieved by opening the wireless adapter and pushing on the claws holding it in place to pop it out. Then its as simple as orienting and pushing it into the slot on the print. You can see all the different iterations of the design [here](https://imgur.com/a/pJ3AQtX)! Happy printing!