HTC Vive Wireless Dual 30mm Fan Shroud

HTC Vive Wireless Dual 30mm Fan Shroud

thingiverse

HTC Vive Wireless Dual 30mm Cooling Fan. 2x - 30x30x6mm 12v Fans @ 7.5v (Low speed fan resistors I had sitting around) 1x - 1.3 ID x 3.5mm OD DC Jack (I suggest a right angle one) This was built due to Grey/Blue screen flashes on the HMD, Falling through the world or slowly losing tracking on the Vive Cosmos. Looking at logs in C:\ProgramData\Vive Wireless\ConnectionUtility\Log The HTC Vive Wireless would start with temps reporting [2020-01-19 17:36:58 +10 0xB70 INFO LOG] M_Temperature=36, R_Temperature=33 -After 20minutes play time- [2020-01-19 17:56:46 +10 0xB70 INFO LOG] M_Temperature=91, R_Temperature=62 After the modification was performed the log output reported [2020-01-24 14:45:39 +10 0x4394 INFO LOG] M_Temperature=30, R_Temperature=23 -After 20minutes play time- [2020-01-24 15:05:19 +10 0x4394 INFO LOG] M_Temperature=48, R_Temperature=49 Both of these were experienced with the same room temperature of 24c and 20minutes of playtime in Beat Saber. After extended use it originally used to display temperatures reporting [2020-01-07 18:19:42 +10 0x32B0 INFO LOG] M_Temperature=99, R_Temperature=63 [2020-01-07 18:19:52 +10 0x32B0 INFO LOG] M_Temperature=100, R_Temperature=65 [2020-01-07 18:20:22 +10 0x32B0 INFO LOG] M_Temperature=102, R_Temperature=66 With a grey/blue HMD flicker every few minutes. This has cut the temperature by half and resulted in minimal drop outs.

Download Model from thingiverse

With this file you will be able to print HTC Vive Wireless Dual 30mm Fan Shroud with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on HTC Vive Wireless Dual 30mm Fan Shroud.