Hubsan H501S Remote - TX Sun Shield

thingiverse

Hubsan H501S Sun Shield (4Parts demountable). Who wants, is allowed to test it from now on, and give some feedback later please. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: Nozzle: 0.4mm / Layer: 0.1mm Infill: 33% / Brim 2.4mm Notes: Material: PLA (Minadax 2.85mm / Grey). Temp: Starting with 210 Degree...only for the first Layer...then going down to 190 Degree. Speed: 35mm/s. So please slow and as cold as possible to print, so that the parts fit together well. The fittings have currently only 0.1mm gap. It may be that a 0.4mm nozzle is not suitable for this purpose, try it otherwise with a smaller nozzle. For best results print each side part sequentially. Right and left side parts are identical, so here must be sliced only one side. How I Designed This Because it is a very useful spare part, easy to construct and print. Sometimes you will not find this simple but useful part at a fair price. Anyone who owns a 3D printer, and some time has left, which can now print this useful spare part, and maybe even save some money.