Hubsan x4 105mm FPV Quadcopter (Based off punkkills' Micro 105 FPV)

thingiverse

This is an FPV conversion frame for the [Hubsan X4 107c](https://www.amazon.com/Hubsan-Channel-2-4GHz-Copter-Camera/dp/B00EXBDWZC/ref=as_li_ss_tl?s=toys-and-games&ie=UTF8&qid=1463024895&sr=1-5&keywords=hubsan+h107c&linkCode=ll1&tag=punkkillsfpv-20&linkId=8194ae2036c43e1475dec241809b67d3). * You will have to remove the camera that comes with the Hubsan X4, * You must shorten, remove, or tape down the four corner lights (I shortened one of the red lights and removed the rest, there's blue leds on the board for syncing) * The *original screws* used to mount the board in the Hubsan X4 will fit the mount/stand offs, I do not know the size, I know that all of the screws that hold together the Hubsan X4 107c will fit these holes. * To complete this frame you must download one of [the tops from punkkills' Micro 105 FPV Quadcopter](https://www.thingiverse.com/thing:1221911/#files). I have named my frames v3 and v4 as they are equivalent with punkkills' v3 and v4 frames. **For info on FPV gear read the sections in [punkkills' post](https://www.thingiverse.com/thing:1221911) titled:** "All in One FPV Gear", "DIY FPV Gear", and "Video Options" As per the suggestion of punkkills, you may use [nylon nuts](http://bit.ly/1T6byOA) and [machine screws](http://bit.ly/1T9ebBg). Personally I have only used the printable [Screw Replacements by navyblueboss](https://www.thingiverse.com/thing:1336747).