Humanoid Battle Robot (stl, schematics and codes)

cults3d

Hello everyone, this is my project, humanoid robot, the robot consists of two parts, one is the emitter and another the receiver, the emitter uses potentiometers to sensing the position, and the receiver emulates the position, the data is sent via bluethoot by two HC-05 modules the receiver is made with 7 hobby servos, it is relatively easy to do, first a pcb based on the diagrams is assembled , then it is connected and finally assembled, take special care with high torque servos!, in theory can use any hobby servo that supports 7.4v. , although it is possible to use much cheaper servos like towerpro if a previous regulatory phase is implemented for every 3 servos (look carefully at the diagrams), the battery should be 2 cells and at least 3000 mA, although I recommend 5000mA, the motors can be of 6-12v, although some very small motors obviously will not be able to move the robot , I use Faulhaber motors for its high torque, the project is still in development so the files can change in the future, however anyone who buys this project will a access to any future update The project included: -STL files -Schematics -Arduino codes check out the function videos in my Facebook page https://www.facebook.com/XedElectronics/