HV6 rotary table stepper motor adaptor

thingiverse

I wanted this to be as strong as possible, so I printed it in PETG. I learned that with PETG, you have to lower the fan speed to 50% or less to get good adhesion between the layers. It makes a big difference! I strongly advise you to USE TREE SUPPORT on the mount, otherwise it may be difficult to remove the support afterwards. The tree support builds only from the bed and up, and spreads out to support the entire "ceiling" of the model. Quite ingeneous! The coupling does not need support. I have made several alterations to both models: The stepper mount: I made an inverted roof-like shape to the top of the opening so that part of the model didn't need support. I had to make larger room for the screws joining it to the motor (I use M5 allen screws). The coupling: This didn't fit neither my rotary table nor the motor. My motor had a 1/4" shaft, so I modified it to suit. Now it also fits my Vertex HV6 rotary table. Update!! : The mount called v7 is updated, as it didn't fit the rotary table as it should. I think my Vertex HV-6 is a newer model (bought late 2018), and therefore is different to the model JobSmolders have.