Hydro foil Wing

prusaprinters

<p>Just 3d-print a front and a rear wing and slap a aluminum bar inbetween.</p><p>I recommend using a big nozzle. don’t use more than 10% infill. the 3d printed core provides basically no strength. I used 600gsm unidirectional and 450gsm biaxial per side. Plus one layer of 160gsm twill. I recommend using a vacuum bag but you can definitely just hand laminate it.&nbsp;</p><p>The wing utilizes a 23015 NACA profile wich should make it stable and great for takeoff at lower speeds.</p>