Icom 706 mk2 Body RJ45 Adapter
thingiverse
With thanks to MIKHAIL IGNATOV and DU2RK for their designs that I used to template some aspects. This is part one of an adapter to replace the discontinued OPC 581/587 cable to enable remote use of the head on the Icom 706mk2g. It is far bulkier but allows the use of off the shelf parts to connect a SHEILDED network cable (not crossover) in leu of the OPC Cable. It should be noted that shielded cable is almost a requirement. Connect shield ground at only one side to avoid ground loop issues. Parts Required: 1. RJ45 Shielded 8P8C PCB Connectors - Ethernet Socket 8-pin (Ebay) (233342322563) 2. RJ45 MagJack Breakout (Ebay) (124986252371) 3.MULTICOMP - TEST-31 - TEST PIN, PCB, 0.7MM (Ebay) (181883169117) 4. Ribbon cable of appropriate size. 5. M3 screws
With this file you will be able to print Icom 706 mk2 Body RJ45 Adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Icom 706 mk2 Body RJ45 Adapter.