iFlight Strider V2 canopy

thingiverse

I just printed the final version in TPU and it's working great. I'll upload a build video of the quad I'm using it for in a bit if people are interrested. Version 3: ==================== File: (Strider_V2_canopy_TSC6_1.stl) Done: -Modified the bottom screws that hold the canopy, to house M3 6mm standoffs. (The Fit is very snug, but I would still glue the standoff in.) -Rounded off some edges -Re-sized the camera holes a bit -Moved the HD camera strap holes closer to the "walls" TO DO: -Figure out some kind of camera angle locking system... -add a simple spacer to lift the HD camera a bit so it can sit flush against the top Version 2: ==================== file: (TSC5.stl) Done: -Added camera lense protection -Added holes for HD camera strap and VTX zip tie -Rounded some corners and improved the print experience. No need for ANY supports. just print as is. -Modified the FPV camera "mount" so that you can use normal short screws to attach the camera. The screw heads are hidden inside the canopy. TO DO: -Modify the bottom screws that hold the canopy, to house M3 6mm standoffs -Stress test Version 1: ==================== file: (TSC3.stl) I tried to make the canopy a bit easier to print and also changed the camera holder to fit a standard size HS1177 camera. You can fit an AIO board, small Rx, VTX and Camera inside the pod. The ESCs need to go on (under) the arms. TO DO: -Add camera lense protection. -Add holes for zip ties to hold the VTX. -Add holes for a HD camera strap -------------------------------------------------------------------------------------------------------------- Please feel free to join in on the development. I'm trying to keep the design as easy to print as possible.