igus bearing generator – fully customizable

thingiverse

igus bearing generator – fully customizable --Design your own iglidur bearing!-- To start press “Open in Customizer”. Use iglidur tribofilament in order to reach similar wear-characteristics as with conventional iglidur bearings. Always lubricant-free, maintenance-free and easy to print with iglidur I150 tribofilament. Check this website for more information: www.igus.eu/tribofilament Here are some tips how to use the "bearing-generator": Choose "flange", if you have axial forces. Choose "slit", if the bearing should have a slit in order to mount it more easily. Be aware of clearance. Be aware that the real inside-diameter will be smaller than in the 3d-model. Be aware of oversize at the outside-diameter. If you want to have “press-fit”. Print Settings Rafts: No Supports: No Resolution: depends on size and printer; usually 0.1 or 0.2 Infill: 100% Notes: Settings at the printer: with small wall-thicknesses you may need to reduce the “parameters” to 1 and you may also need to adjust the “shell-thickness”. Otherwise changes at the 3d-model won’t affect the printed part. Material for printing wear-parts: Use iglidur I150 for application-temperatures up to 65°C and for speeds up to 0.2 m/s Use iglidur I180 for application-temperatures up to 80°C or more dynamical applications iglidur I180 has more warpage than iglidur I150 --> so it is recommended to start with iglidur I150 Check this website for more information: www.igus.eu/tribofilament