Ikea Adils table leg or 40mm tube shelf bracket.

prusaprinters

<p>Update, 27th January 2019</p> <p>Added a version with two screw holes for mounting to underside of shelf</p> <p>This is the preferred version as both sides are now more robust.</p> <p>Update 30th October 2017</p> <p>I've added a revised version with the upper screw hole part removed on one side.</p> <p>This is to allow a little more flexibility in the plastic around the screw clamp area.</p> <p>This is a bracket I designed to allow a full size shelf to be fitted at any height underneath an Ikea table fitted with Adils 40mm legs.</p> <p>The bracket clamps around the legs, just slide onto the leg and lock in place at the desired height using a 25mm (approx) 4mm bolt, tighten enough to stop the bracket sliding, if it won't twist on the leg using reasonable force, then it's tight enough.</p> <p>There are two screw holes in the top of the bracket to attach to the shelf.</p> <p>And one hole on the updated version,</p> Category: Household