IKEA Lack Table Leg Leveler

prusaprinters

<p>Leg levelers for IKEA Lack table or anything with a 50mm square leg. I printed them at .30 layer height with petg and they work fine. They provide a maximum adjustment of 10-11 mm per leg.</p> <p>I have also included a wrench to help with the adjustment if you need it. I was able to do it with my fingers just fine but if I had a wrench that size I would have used it for sure.</p> <p>Update 3-22-19: I did print the wrench and it works very well. It's admittedly a little loose fitting but still works great and isn't a waste of time and plastic to print. I am glad I have it now for when I move my Lack enclosure. It makes adjustment way easier.</p> <p>Check out these other things for IKEA Lack table...</p> <p>Stacking leg couplers: <a href="https://www.thingiverse.com/thing:3488697">https://www.thingiverse.com/thing:3488697</a><br/> Leg stiffeners: <a href="https://www.thingiverse.com/thing:3490946">https://www.thingiverse.com/thing:3490946</a></p> <h3>Print instructions</h3><h3>Category: Decor Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> .3</p> <p><strong>Infill:</strong> 20</p> <p><strong>Filament:</strong> hatchbox petg orange<br/> <strong>Notes:</strong></p> <p>Adjust the infill and resolution to your taste. I can't remember what infill percentage I actually used when I made them so I guessed at 20%. The wrench was printed with 20% cubic infill + 3 perimeters and was plenty stiff.</p>