IKEA Markus chair arm

prusaprinters

<p>These are smaller arms for the Markus chair to enable it to fit easily under a desk, the final height is 160mm from the bolt centreline. The design is loosely based on Hichi's but reduced to fit on a standard printer with a 250 mm x 200 mm bed. I have embedded the bolts fully in the rim to get better stiffness. The design is symmetrical and attaches using the standard bolts.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Mk2.5s</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div><strong>Resolution:</strong></p> <p>0.35 mm</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>80% around bolt holes </p></div><br/> <strong>Filament:</strong><br/> Any PLA <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>This needs to be pretty strong particularly around the bolt holes. This was printed with 5 perimeters at .35 layer height and 20% fill but i used the modification volume in PrusaSlicer to put 80% fill around the bolt holes. This worked fine and the arms feel as rigid as the steel ones.</p></div></p> </p></p></p> Category: Office