Ikea Skadis Plant painting

prusaprinters

<p>Inspired by some other available living paintings. But those where or very expensive or just very small.</p><p>As I had an Ikea Skadis pegboard with no purpose. I came to the Idea of making one of my own.</p><p>For now I got only a render picture(without plants as I'm not skilled enough to add them correctly), as It will take to long to print and make it complete with a real picture.</p><p>&nbsp;</p><p>You can make your own design with the different size plant boxes/plant holders.</p><p>Also included the Fusion 360 files if you want to make adjustments.</p><p>&nbsp;</p><p>everything can be printed without supports</p><p>Print the plantholders in the right orientation on the correct side with 3 perimeters and 100% infill with random starting lines, to ensure it will not leak any water through.</p><p>Print the connector as shown on the picture, so it wil have the right allignment for the weight contribution, also print with 3 perimeters and an infill of 50%, so it will still have some flex in it to connect it to the pegboard.</p><p>&nbsp;</p><p>To put it on the pegboard:</p><p>First put the connector on the pegboard in the right holes. it has an tight fit, so it stays good in place</p><p>Than attach the plantbox to the connectors, it will take a bit of force, but than it will be secure.</p><p>To remove: push the plantbox up and it will come loose, than you can remove the connectors from the pegboard.</p><p>&nbsp;</p><p>Edit: 05-05-2021: uploaded photos of my completed living painting.</p><p>&nbsp;</p><p>&nbsp;</p>