Impulse RC Alien RR5 Mounting

prusaprinters

<p>Clean up your build for Impulse RC Alien RR5. This includes:<br/> 1) Receiver tray, I designed it for FrSky X4R, but may work with others up to 22.4mm wide (could mount upside down for larger)<br/> 2) VTX tray, I designed this for TBS Unify Pro 5G8 HV - Race, but may work with others up to 23 mm wide (could mount upside down for larger). I added a horizontal bar at the back to zip tie your pigtail to for strain relief.<br/> 3) Antenna mount, Designed to work with two different pigtail connectors. my TBS came with a style that had a longer bar, but I have also used some with just a hex nut. I have test fit both types. Angle is around 50 degrees.<br/> 4) Spacers - all three items when mounted don't completely fill the stack on there own I created a quick few spacers which I think will be helpful. (I have not yet printed and tested the spacers yet so they may need some adjustment to fill out the stack correctly.</p> <p>Updated: 8/10/2018<br/> 5) Per request created a merged STL that combines the VTX tray and the antenna mount. This was a quick merge of the existing objects so not a clean as a redesign but should still work (not print tested)</p> <h3>Print instructions</h3><p>You shouldn't need supports for any of them. Even the antenna mount printed find for me without support.</p>