Injora Cherokee Cab/Back half cage body panel filler

thingiverse

I like the look and price of the Injora Cherokee cab/back half cage for use with my 1/10 scale RC chassis except for one thing. The rear of the cab looked unfinished to me under the B pillar because of the lack of... anything really. That big gap makes the body look unfinished and not a true scaler. So I made this part to replace the spacers that are used between the cab and cage. I measured my spacers at 11.4mm thick and it is sized accordingly. At this 11.4mm the cage fit snugly against the back of the cab but you can see it doesn't 100% line up with the B-Pillar. Print it thicker if you want it to line up with the B pillar and crate a little gap between the cab and cage. You will need to print 2, one left and one right. If you mirror the part in your slicer you can get a even texture on the outside surface. I just printed mine twice and one part has a slightly different texture on the outside because it was against the glass bed. Reversing one will give you the same texture on both without the need to do any additional post processing because of surface texture.