Intel NUC Wall Mount Clip

prusaprinters

<p>At some point I fount a wall mount for the Intel NUC that looked like a good design, but it didn't have any way to lock the NUC to the wall, so a bump or earthquake wouldn't knock it off. This sets out to solve that with a second piece that mounts to the wall with the screws through it, the clip mounts to the NUC and when you slide the NUC on it clips into place and can only be removed by releasing the clip on the back.</p> <p>I cannot find the original design for the bracket that I based this around, so I have included it in the attached files as "Bracket.stl". If you are the author or know where I can link to, I will happily update this description.</p> <p>See the attached renders for how the two parts clip together. I have also included a DXF that can be printed out as a layout guide for where to drill into your wall for the screws. As the screws must be outset slightly, I recommend using plastic wall anchors as they offer a bit of resistance to the screw to keep it from twisting in or out.</p> <p>Sorry I don't have any pictures of this in-use. I have since gotten a server rack and designed a <a href="https://www.thingiverse.com/thing:4664828">mount for there</a>.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Creality CR-6 SE</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.2</p></div> <p><strong>Infill:</strong></p> <p>30%</p> <p><strong>Filament:</strong></p> Generic PLA </p></p> Category: Computer