Interchangeable FPV Pan/Tilt Camera Mount for RC Models

thingiverse

Howdy, are you looking for an interchangeable pan or pan & tilt system for FPV, with platforms for a Mobius or RunCam 2 HD camera? The pan axis will accept a standard 9g or 12g servo or ideally a 180 degree servo such as the Turnigy TGY-180D. As for the tilt, a decent metal geared servo is suggested. UPDATE: There are two extra files which include pre-made supports for your ease of printing & a video of them is here https://www.youtube.com/watch?v=ABXVgXuacas **Built Tips: ** - Parts are best printed in tougher materials such as ABS or carbon laced filament. - Drilling the holes out with a 3.0mm drill makes for a smoother tilt action. - M3 plastic or metal bolts & nuts (14mm or longer) are needed to secure the tilt platform. - Work on getting the pan dome to slide as **close as possible to the base** (almost a friction fit), so the pan/tilt part does not rock. This will save excessive stress being put onto you pan servo when landing - Printing an extra base and making a "sandwich of foam" is a great way of providing a secure way of holding the top pan/tilt system in place and through thinner layers of foam Created by Andrew Boulton, his YouTube channel is here https://www.youtube.com/channel/UCLv1vkEDIDWzac0UaVG2YRQ Check the license for these parts, attribution is required and NO commercial deviations.