Intex sand filter waste port adapter
prusaprinters
<p>I couldn't find a model here or any other site I checked that would screw on the waste port on our Intex sand filter. After some hair-pulling (Intex seems to use an oddball thread) in Fusion and several iterations, I now have an adapter. I can use the 1.25" pool hose from the vacuum to route the discharge water (draining, backflushing, etc) away from the pool area to a more convenient area.</p><p>The thread OD is 60mm, 10TPI, angle (best I can tell) is 60deg, thread ID is about 57.5mm.</p><p> </p><p>Recommend PETG since this is an outdoor use item. Supports not needed if printed as shown in the pic. I chose that orientation to get a smooth surface for the rubber seal on the port. Used a brim just in case, but that depends on your bed adhesion strength.</p>
With this file you will be able to print Intex sand filter waste port adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Intex sand filter waste port adapter.